my world.

respectfully, which one might be the shape of the Earth?

A standing bell or resting bell is an inverted bell, supported from below with the rim uppermost. Such bells are normally bowl-shaped, and exist in a wide range of sizes, from a few centimetres to a metre in diameter. They are often played by striking, but some—known as singing bowls—may also be played by rotating a mallet around the outside rim to produce a sustained musical note.

Struck bowls are used in some Buddhist religious practices to accompany periods of meditation and chanting.

Struck and singing bowls are widely used for music making,

meditation and relaxation,

as well for personal spirituality.

When a raindrop crashes into the surface of a puddle... 😉👉🏻the collision causes tiny currents to spin around inside the droplet as well as below the surface of the puddle. If you could peer into the droplet, you'd see water rushing downward along the edges inside the drop and then climbing back up toward the center, That spinning motion inside the droplet, invisible under most circumstances, creates enough force to tug on the air surrounding the droplet.

The air forms into a thin, fast stream of wind that flows under the drop, holding it a hair's width above the surface, however, that those engines — inside the droplet and below the surface of the liquid — don't spin on their own. Heat differences between a drop and the liquid it impacts drive the rotation and the levitation. Once the raindrop warms or cools to the temperature of the puddle — a process sped up by those spinning engines that can take anywhere from milliseconds to seconds — it will crash through its magic rug of air and disappear into the puddle,

The MIT researchers figured out how to calculate the minimum difference in heat for levitation to occur in any given liquid. If the difference is greater than that minimum, they found, the droplet levitates longer. Any shorter, and the drop won't levitate at all.

Through some clever experimental setups and the aid of high-speed cameras, the researchers were able to make some beautiful videos of the levitation engines in action. The scientists mixed some shiny flakes of titanium dioxide into oil, then pinned a drop of that oil against the surface of a larger pool with a syringe. They backlit the drop with a bright LED, and the titanium dioxide lit up as it swirled in the churning currents, following the path of the engines.

🙏🏻❤️

Sonoluminescence can occur when a sound wave of sufficient intensity induces a gaseous cavity within a liquid to collapse quickly. ... The bubbles are very small when they emit the light—about 1 micrometre in diameter—depending on the ambient fluid (e.g., water) and the gas content of the bubble (e.g., atmospheric air).

Plasma Activated Water is produced only by making use of water, air and electricity.. .

A Star and hence our Sun, is an almost entirely ionized ball of plasma, consisting of electrons and ions, in which there is hardly any gas (neutral atoms). The movement of the plasma produces strong magnetic fields and corresponding electric currents.

Although photon upconversion was first studied in bulk crystals and optical fibers, it became better known with the development of nanomaterials. This happened due to the many ways in which nanostructures with photon upconversion properties can be applied. This new class of materials may broadly be referred to as upconverting nanoparticles or UCNPs.

Photon upconversion through sensitized triplet-triplet annihilation has the advantage of being efficient even at low excitation intensities making it potentially useful for converting sun light to enhance solar cell efficiencies.

Semiconductor nanoparticles or quantum dots have often been demonstrated to emit light of shorter wavelength than the excitation following a two-photon absorption mechanism, not photon upconversion. However, recently the use of semiconductor nanoparticles, such as CdSe, PbS and PbSe as sensitizers combined with molecular emitters has been shown as a new strategy for photon upconversion through triplet-triplet annihilation.

[20] They have been used to upconvert 980 nm infrared light to 600 nm visible light;[20] green light to blue light;[21][22] and blue light to ultraviolet.[23] This technique benefits from a very high upconverting capability. Especially, these materials can be used to capture the infrared region of sunlight to electricity and enhance the efficiency of photovoltaic solar cells.